Vikas Electrical Kit

Description

Vikas R&D Electrical Kit

The Vikas R&D Electrical Kit is a complete flight control and power system designed for UAV developers, researchers, and drone builders. Featuring Pixhawk-based control and high-efficiency components, this kit ensures seamless integration and reliable performance for drone projects.

Kit Includes

• Pixhawk-Based Flight Controller for precise UAV control
• GPS Module (M8N Chip) for accurate positioning
• Proprietary Bottom PCB for streamlined power distribution
• 20A ESCs (4x) – Custom-made for Vikas
• 920KV Motors (CW & CCW) for balanced propulsion
• Motor Control Connectors for secure wiring

Ideal For

• UAV research & development
• Custom drone builds & flight testing
• Autonomous navigation projects

What Comes in the Kit

1 x Flight Controller: Radiolink MiniPix

A compact and cost-effective flight controller based on the Pixhawk architecture, ideal for research and educational drones.

Technical Specifications:

• Processor: STM32F427 32-bit ARM Cortex M4 core with FPU
• IMU: MPU6500 accelerometer/gyroscope
• Barometer: MS5611
• Magnetometer: External required (GPS unit supports this)
• Input Voltage: 4.8V – 5.5V
• Communication Interfaces: 1 x UART (telemetry), 1 x USB, I2C, PPM, SBUS, PWM output
• Firmware: Supports PX4 and ArduPilot
• Weight: ~15g
• Form Factor: Compact and lightweight, ideal for small drones

1 x GPS Module: Radiolink TS100

High-performance GNSS module with integrated compass for accurate global positioning and navigation.

Technical Specifications:

• GNSS Systems: GPS, GLONASS, Beidou
• Positioning Accuracy: ±2.5 meters (horizontal)
• Refresh Rate: 10 Hz
• Compass: Built-in digital compass (HMC5883L)
• Communication: UART and I2C
• Operating Voltage: 5V DC
• Antenna: Ceramic active antenna
• LED Indicator: Satellite fix status
• Weight: ~20g
• Mounting: Includes anti-vibration mount and cable

4 x Brushless Motors: 920KV 2212 (2 CW + 2 CCW)

• KV Rating: 920KV
• Configuration: 14 Poles / 12 Slots
• Max Current: ~15-18A
• Mounting Hole Distance: 16mm x 19mm
• Propeller Compatibility: 8”–10” props
• Shaft Diameter: 3.17mm
• Weight: ~55g each

4 x Electronic Speed Controllers: Hobbyking 20A ESC (Custom Vikas Connectors)

• Max Current: 20A continuous, 25A burst (10s)
• BEC Output: 5V / 2A Linear
• Firmware: Custom firmware compatible with SimonK/BLHeli
• Connector: Proprietary Vikas plug-in system for easy swaps

1 x Bottom PCB (Proprietary R&D Enabler)

• Designed specifically for R&D and prototyping
• Integrated voltage rails: 5V, 3.3V, and 12V outputs
• Power distribution for ESCs, sensors, onboard computers (Raspberry Pi, Jetson Nano, etc.)
• Solder pads and headers for custom circuit integration

1 x 2200 mAh Li-Po Battery

• Voltage: 11.1V (3S)
• Capacity: 2200 mAh
• Discharge Rate: 25C – 35C
• Connector: XT60

1 x Li-Po Balance Charger

• Supports 2S–3S Li-Po batteries
• LED indicators for cell balance and charging completion
• Over-voltage and over-current protection