The Vikas R&D Camera Kit is an advanced drone research and development platform with enhanced aerial imaging capabilities. Designed for students, researchers, and developers, it enables hands-on learning, UAV experimentation, and real-time camera applications.
Key Features
- Pixhawk-based Flight Controller for precise navigation
- Skydroid T12 Transmitter for long-range, stable control
- Skydroid Two-Axis Gimbal Camera for smooth aerial imaging
- Supports UART, I2C, and MAVLink for seamless communication
- Compatible with ROS2 & simulation software for autonomy research
- Sensor Integration with ultrasonic, LiDAR, GPS, and IMU
- Mission Planner & QGroundControl (QGCS) support
- Modular design for customizable payloads and applications
Ideal For
- UAV research & aerial imaging projects
- Engineering students & drone developers
- STEM education & autonomous system testing
What Comes in the Kit
1 x Flight Controller: Radiolink MiniPix
A compact and cost-effective flight controller based on the Pixhawk architecture, ideal for research and educational drones.
Technical Specifications:
- Processor: STM32F427 32-bit ARM Cortex M4 core with FPU
- IMU: MPU6500 accelerometer/gyroscope
- Barometer: MS5611
- Magnetometer: External required (GPS unit supports this)
- Input Voltage: 4.8V – 5.5V
- Communication Interfaces: 1 x UART (telemetry), 1 x USB, I2C, PPM, SBUS, PWM output
- Firmware: Supports PX4 and ArduPilot
- Weight: ~15g
- Form Factor: Compact and lightweight, ideal for small drones
1 x GPS Module: Radiolink TS100
High-performance GNSS module with integrated compass for accurate global positioning and navigation.
Technical Specifications:
- GNSS Systems: GPS, GLONASS, Beidou
- Positioning Accuracy: ±2.5 meters (horizontal)
- Refresh Rate: 10 Hz
- Compass: Built-in digital compass (HMC5883L)
- Communication: UART and I2C
- Operating Voltage: 5V DC
- Antenna: Ceramic active antenna
- LED Indicator: Satellite fix status
- Weight: ~20g
- Mounting: Includes anti-vibration mount and cable
4 x Brushless Motors: 920KV 2212 (2 CW + 2 CCW)
- KV Rating: 920KV
- Configuration: 14 Poles / 12 Slots
- Max Current: ~15-18A
- Mounting Hole Distance: 16mm x 19mm
- Propeller Compatibility: 8”–10” props
- Shaft Diameter: 3.17mm
- Weight: ~55g each
4 x Electronic Speed Controllers: Hobbyking 20A ESC (Custom Vikas Connectors)
- Max Current: 20A continuous, 25A burst (10s)
- BEC Output: 5V / 2A Linear
- Firmware: Custom firmware compatible with SimonK/BLHeli
- Connector: Proprietary Vikas plug-in system for easy swaps
4 x Motor Mounts (Molded Plastic Shells)
- Custom-designed heavy-duty motor mounts made from durable molded plastic
- Withstand vibration and mechanical stress
- Allow for fast, tool-less replacements
8 x Arm Bases (Custom Vikas Shell)
- Precision-molded hard plastic that securely holds the frame together
- Designed to fit modular carbon arms and ensure easy maintenance
4 x Carbon Fiber Arms (Custom-Made for Vikas)
- Lightweight yet highly rigid
- Designed for modular swapping and high endurance
- Mounting compatible with Vikas motor mounts and bases
4 x Carbon Fiber Landing Poles
- Shock-absorbing landing gear
- Carbon fiber structure ensures durability during repeated takeoffs/landings
1 x Top Plate (Universal Integration Platform)
- Designed for wide compatibility with various drone components
- Supports multiple battery sizes and payloads
- CNC-cut for precision and flexibility in mounting
1x Bottom PCB (Proprietary R&D Enabler)
- Designed specifically for R&D and prototyping
- Integrated voltage rails: 5V, 3.3V, and 12V outputs
- Power distribution for ESCs, sensors, onboard computers (Raspberry Pi, Jetson Nano, etc.)
- Solder pads and headers for custom circuit integration
1 x 5200 mAh GenX Li-Po Battery :
- Voltage: 11.1V (3-cell Li-Po)
- Capacity: 5200 mAh
- Discharge Rate: 40 C continuous (with ~60–80 C burst on some packs)
- Connector: XT90S (main discharge)
1 x Li-Po Balance Charger
- Supports 2S–3S Li-Po batteries
- LED indicators for cell balance and charging completion
- Over-voltage and over-current protection
1 x Set of Consumables
- Zip ties, double-sided tape, Velcro straps
- For cable management and secure mounting
1 x Fasteners Kit for Vikas
- Screws, bolts, and nuts compatible with all parts of the Vikas drone
- Stainless steel and anodized aluminum mix
1 x 2.5mm Allen Key
- Provided for assembly and maintenance
1 x Set of Silicon Landing Caps
- Soft end caps for landing poles
- Reduces vibration and wear during landings
1 x Propeller Set (CW & CCW)
- 2 x Clockwise and 2 x Counterclockwise
- Balanced for smooth flight and efficient thrust
1 x Skydroid 2-Axis Gimbal Camera
A compact, stabilized camera unit with real-time video transmission and independent pitch and roll control, designed for drones used in mapping, monitoring, and research.
Technical Specifications:
- Camera Sensor: 1/3" CMOS sensor
- Video Resolution: 1080p @ 30fps (Full HD)
- Field of View: 120° wide-angle lens
- Gimbal Type: 2-axis brushless motor gimbal (pitch and roll)
Stabilization Angle Range:
- Pitch: -90° to 30°
- Roll: ±45°
Video Transmission:
- Wireless digital transmission via Skydroid system
- Latency: <200ms
- Range: Up to 5 km (with Skydroid receiver)
Control Interface:
- UART / PWM for gimbal control
- S.Bus support for pitch/roll input
- Operating Voltage: 7V – 24V (2S–6S LiPo)
- Mounting: Vibration-dampened mounting points for drone frame
- Weight: ~160g
Special Features:
- Plug-and-play with Skydroid ground station
- Live video preview via mobile app or ground control system
- Ideal for low-latency FPV or autonomous navigation visual feedback
1 x Skydroid T12 Transmitter & Receiver System
A professional-grade 12-channel long-range remote control system with integrated telemetry and video link capabilities, perfect for R&D drones requiring precise control and live video transmission.
Transmitter (T12) Specifications:
- Frequency Band: 2.4GHz FHSS (Frequency Hopping Spread Spectrum)
- Channels: 12 fully programmable channels
- Control Range: Up to 10–15 km (line of sight, open area)
- Telemetry Range: Up to 10 km
- Display: 3.5-inch TFT color screen for telemetry and video (optional support with Skydroid app)
- Latency: <30ms
- Battery: Built-in 4000mAh rechargeable lithium battery
- Battery Life: 8–10 hours continuous operation
Interfaces:
- USB-C charging and firmware update
- Micro-HDMI for external monitor (on advanced variants)
- Trainer port for simulator or buddy box function
- Weight: ~620g
- Software Compatibility: QGroundControl, Mission Planner via mobile app or tablet interface
Receiver (R12 or T12-Compatible Module):
- Input Voltage: 4.8V – 10V
- Channels: 12 PWM/S.Bus/PPM outputs
- Telemetry Support: Integrated UART for Pixhawk or other flight controller telemetry
- Form Factor: Compact and lightweight for easy drone integration
- Antenna Type: Dual diversity for stronger signal
- Mounting: Adhesive-backed or zip-tie mounting slots
Integration Highlights
- Fully integrated with the Vikas Bottom PCB for streamlined power and signal routing
- Seamless compatibility with Pixhawk-based flight controllers
- Real-time gimbal control and FPV streaming using the Skydroid app on Android devices
- Ideal for vision-based autonomy experiments, target tracking, and remote inspection
Vikas R&D Camera Kit : Advanced Aerial Imaging & UAV Research Platform
A complete drone development system designed for students, researchers, and developers who want hands-on experience with aerial imaging, autonomous systems, and real-time video applications.
Built around a Pixhawk-based flight controller and featuring a professional Skydroid T10 long-range control system plus a stabilized 2-axis gimbal camera, this kit delivers precision flight, smooth imaging, and powerful research freedom.
What’s Included
Flight & Navigation
- Flight Controller: Pixhawk-Compatible MiniPix : Core autopilot unit for stable and programmable flight, supporting popular open-source firmware (PX4/ArduPilot).
- GPS Module: Radiolink TS100 : High-performance GNSS with built-in compass for accurate global positioning.
Frame & Propulsion
- 4 × Brushless Motors (920KV) : Balanced propulsion set designed for stable lift and control.
- 4 × 20A Electronic Speed Controllers : Custom Vikas-connector ESCs for efficient motor management.
- Carbon Fiber Arms & Landing Poles : Lightweight, durable frame components for reliable operation.
- Motor Mounts, Arm Bases & CNC Top Plate : Structural parts for secure assembly and flexibility.
Power & Electronics
- 5200 mAh 3-cell Li-Po Battery + Balance Charger : Reliable power system with safety features for balanced charging.
- Proprietary Bottom PCB : Central power distribution board supplying regulated voltages and enabling sensor/computer integration.
Imaging & Remote Control
- Skydroid 2-Axis Gimbal Camera : Stabilized Full HD camera with wide-angle view and low-latency video transmission for mapping, FPV, and research tasks.
- T10 10-Channel Receiver : Long-range FHSS controller with dual antennas, telemetry, and app-based parameter tuning for robust UAV operation.
Assembly & Accessories
- Balanced Propeller Set (CW & CCW) for efficient thrust
- Silicone Landing Caps to reduce vibration during landings
- Fasteners & Consumables Kit (screws, zip ties, tape, straps)
- Allen Key & Assembly Tools for quick setup
Vikas R&D Camera Kit : Advanced UAV Imaging & Research Platform
The Vikas R&D Camera Kit is a powerful, modular drone development platform built for aerial imaging, research, and autonomous UAV applications. Designed for students, researchers, and drone developers, this kit combines a Pixhawk-based flight system with a stabilized gimbal camera and long-range Skydroid control, enabling real-time video, precise navigation, and hands-on experimentation.
Perfect for academic projects, vision-based autonomy, mapping, and inspection use cases.
What’s Included in the Kit?
Flight Control & Navigation
Radiolink MiniPix (Pixhawk-Based Flight Controller)
Compact, lightweight, and research-ready controller supporting PX4 & ArduPilot.
- STM32F427 ARM Cortex-M4 processor
- MPU6500 IMU + MS5611 barometer
- UART, USB, I2C, PPM, SBUS, PWM
- Input Voltage: 4.8V–5.5V | Weight: ~15g
Radiolink TS100 GPS Module
High-accuracy GNSS with integrated compass.
- GPS + GLONASS + Beidou
- ±2.5m positioning accuracy | 10Hz refresh rate
- Built-in compass & anti-vibration mount
Camera & Control System
Skydroid 2-Axis Gimbal Camera
Stabilized Full-HD camera for smooth aerial footage and FPV research.
- 1080p @ 30fps | 120° wide-angle lens
- 2-axis brushless gimbal (Pitch & Roll)
- <200ms latency | Up to 5km transmission range
- Plug-and-play with Skydroid ground station
- Ideal for FPV, mapping, and visual navigation
Skydroid T12 Transmitter & Receiver (12-Channel)
Professional-grade long-range control with telemetry support.
- 12 programmable channels
- Up to 10–15km control range (LOS)
- <30ms latency for responsive control
- Built-in 4000mAh battery (8–10 hrs use)
- Seamless integration with Pixhawk & GCS apps
Propulsion & Frame System
- 4 × 920KV Brushless Motors (CW & CCW)
- 4 × 20A ESCs with Custom Vikas Connectors
- Carbon Fiber Arms & Landing Poles
- Heavy-Duty Motor Mounts & Arm Bases
- CNC-Cut Universal Top Plate
Lightweight, rigid, and designed for quick maintenance and modular upgrades.
Power, PCB & Accessories
Proprietary Vikas Bottom PCB
Built for R&D and rapid prototyping.
- 5V, 3.3V & 12V power rails
- Supports sensors and onboard computers (Raspberry Pi, Jetson Nano)
- Easy signal routing and expansion
Power & Accessories
- 5200mAh 3-cell Li-Po Battery + Balance Charger
- Propeller Set (CW & CCW)
- Fasteners kit, consumables, Allen key
- Silicone landing caps for vibration reduction
Integration Highlights
- Fully compatible with Pixhawk, ROS2, and Skydroid ecosystem
- Real-time FPV and gimbal control via Android app
- Ideal for vision-based autonomy, target tracking & inspection
- Designed for rapid prototyping and academic experimentation
Vikas R&D Camera Kit : Professional Aerial Imaging & UAV Research Platform
Build, test, and innovate with the Vikas R&D Camera Kit, a complete UAV development system designed for students, researchers, and drone developers. This kit combines precision flight control, live video feedback, and long‑range operation to support autonomous experimentation, aerial survey work, and real‑world drone applications.
What’s Included in the Kit?
Flight & Navigation
- Pixhawk‑Compatible MiniPix Flight Controller : Precise autopilot supporting PX4/ArduPilot for autonomous research development.
- Radiolink TS100 GPS Module : High‑accuracy GNSS with integrated compass for dependable positioning.
Structure & Propulsion
- 4 × Brushless Motors (920KV) : Efficient propulsion for stable lift and maneuvering.
- 4 × Electronic Speed Controllers (20A ESCs) : Custom Vikas connectors for easy, reliable motor control.
- Carbon Fiber Arms & Landing Poles : Lightweight, durable structural components.
- Motor Mounts & Frame Plates : Precision hardware for stable assembly and maintenance.
Power & Electronics
- 5200 mAh 3-cell Li‑Po Battery + Balance Charger : Essential power system with safety features and balanced charging.
- Proprietary Bottom PCB : Central power distribution with regulated outputs for sensors, flight controller, and other devices.
Imaging & Remote Control
- Integrated 3‑in‑1 camera unit for live video feedback and FPV capabilities during flight.
- Long‑range, 10‑channel FHSS remote control system with dual antennas and integrated video/data link for robust UAV operation.
Assembly & Accessories
- Propeller Set (CW & CCW) for balanced thrust
- Silicone Landing Caps to reduce vibration on touchdown
- Fasteners & Consumables Kit (screws, zip ties, straps)
- Allen Key & Basic Tools for easy assembly
Vikas R&D Camera Kit : Professional UAV Imaging & Research Platform
Unlock advanced aerial imaging, live FPV feedback, and research‑grade UAV control with the Vikas R&D Camera Kit- A complete development platform designed for students, researchers, and drone developers. Perfect for autonomous experiments, aerial surveys, and real‑world drone projects.
What’s Included in the Kit?
Core Flight & Control
- Pixhawk‑Compatible MiniPix Flight Controller : Reliable autopilot with support for PX4/ArduPilot and advanced mission planning.
- Radiolink TS100 GPS Module : High‑accuracy GNSS navigation with integrated compass for precise positioning.
Structure & Propulsion
- 4 × Brushless Motors (920KV) : Efficient and stable propulsion for quadcopter performance.
- 4 × 20A Electronic Speed Controllers (ESCs) : Custom Vikas connector ESCs for neat integration and reliable motor control.
- Carbon Fiber Arms & Landing Poles : Lightweight, durable frame components built for UAV research.
- Motor Mounts & Frame Plates :Precision parts for secure assembly and component mounting.
Power & Electronics
- 5200 mAh 3-cell Li‑Po Battery + Balance Charger : Ready‑to‑fly power system with charging protection.
- Proprietary Bottom PCB : Central power distribution board with 5V/3.3V/12V outputs for sensors and companion computers.
FPV Camera & Remote Control
- Compact, lightweight 3‑in‑1 FPV camera compatible with the T12 system for real‑time video transmission and telemetry.
- Professional long‑range remote system with integrated camera/telemetry support and ergonomic design for comfortable, extended use.
Assembly & Accessories
- Propeller Set (CW & CCW) – Balanced props for efficient lift.
- Silicone Landing Caps – Shock‑absorbing protection for landing gear.
- Fasteners & Consumables Kit – Screws, zip ties, tape & straps for tidy builds.
- Allen Key & Basic Tools – Included for quick assembly.
Vikas R&D Camera Kit: Professional Aerial Imaging & UAV Research System
Take your UAV research and aerial imaging projects further with the Vikas R&D Camera Kit- A complete, modular platform for students, researchers, and developers. Designed for real-world experimentation, autonomous missions, and high-quality visual data capture, this kit integrates advanced flight control, stabilized imaging, and long-range operation.
What’s Included in the Kit?
Flight & Navigation System
- Pixhawk-Compatible Flight Controller : Core autopilot for precision navigation and autonomous testing.
- High-Accuracy GPS Module : Reliable GNSS positioning with integrated compass for stable flight.
Frame & Propulsion Hardware
- 4 Brushless Motors : Smooth, efficient lift power.
- 4 Electronic Speed Controllers (ESCs) : Custom connector ESCs for easy integration.
- Carbon Fiber Arms & Landing Poles : Lightweight, durable structural components.
- Motor Mounts, Arm Bases & Top Plate : Precision hardware for secure builds.
Power & Electronics
- 5200 mAh Li-Po Battery + Balance Charger :Ready-to-use power pack with safety features.
- Proprietary Bottom PCB : Central power distribution with multiple voltage outputs for sensors and computers.
Imaging & Control
- SIYI A8 4K Mini Gimbal Camera : Compact stabilized A8 mini gimbal camera with 4K-capable sensor and versatile video output (HDMI, Ethernet, etc.).
- Skydroid H12 Pro Remote Controller : Professional-grade 12-ch long-range controller with integrated video/telemetry system, Android-based interface, and up to ~10 km HD transmission.
Assembly & Accessories
- Balanced Propeller Set (CW & CCW)
- Silicone Landing Caps for vibration reduction
- Fasteners & Consumables Kit (screws, zip ties, tape, straps)
- Allen Key & Basic Assembly Tools
Vikas R&D Camera Kit : Next-Level UAV Imaging & Research Platform
Designed for students, researchers, and developers, the Vikas R&D Camera Kit delivers a complete aerial imaging and research solution. It combines precision flight control, real-time FPV streaming, and long-range operation which are perfect for autonomous drone development, aerial surveys, and hands-on UAV experimentation.
What’s Included in the Kit?
Core Flight System
- Flight Controller (Pixhawk-Compatible MiniPix) – Stable, open-source autopilot supporting PX4 and ArduPilot.
- GPS Module (Radiolink TS100) – Accurate GNSS positioning with built-in compass for reliable navigation.
Structure & Propulsion
- 4 × Brushless Motors (920KV) : Balanced propulsion for smooth, efficient lift.
- 4 × Electronic Speed Controllers (20A ESCs) : Custom Vikas connectors for clean integration.
- Carbon Fiber Arms & Landing Poles : Lightweight, strong structural components.
- Motor Mounts & Frame Plates : Precision hardware for secure assembly.
Power & Electronics
- 5200 mAh 3-cell Li-Po Battery + Balance Charger : Ready-to-fly power system with safety features.
- Proprietary Power Distribution PCB : Multiple voltage rails and expansion points for sensors and companion computers.
Imaging & Remote Control
- Lightweight FPV camera optimized for T10 integration, streaming live video for situational awareness and research tasks.
- Professional-grade 10-channel FHSS controller with integrated data/video transmission, app-configurable parameters, and long endurance for extended field use.
Assembly & Accessories
- Propeller Set (CW & CCW) for balanced thrust
- Silicone Landing Caps to reduce landing impacts
- Fasteners & Consumables Kit (screws, zip ties, Velcro straps)
- Allen Key and basic assembly tools
Vikas R&D Camera Kit : Complete Aerial Imaging & UAV Research Platform Transform your drone development and aerial research with the Vikas R&D Camera Kit, an all-in-one platform designed for students, researchers, and UAV developers. This kit combines precise flight control, real-time FPV imaging, and long-range control to support hands-on experimentation, autonomous system testing, and advanced UAV projects. What’s Included in the Kit? Flight & Navigation System • Flight Controller : Pixhawk-Compatible MiniPix: Precision autopilot supporting PX4 and ArduPilot for autonomous control. • GPS Module : Radiolink TS100: High-performance GNSS with integrated compass for accurate positioning. Frame & Propulsion • 4 Brushless Motors (920KV): Smooth and efficient propulsion for stable flight. • 4 Electronic Speed Controllers (20A ESCs): Custom Vikas connector ESCs for clean integration. • Carbon Fiber Arms & Landing Poles: Durable, lightweight structural components. • Motor Mounts & Frame Plates: Precision hardware for secure assembly. Power & Distribution • 5200 mAh 3-cell Li-Po Battery + Balance Charger: Ready-to-fly power system with safety features. • Proprietary Bottom PCB: Central power distribution board with multiple regulated outputs for sensors and onboard computers. FPV Imaging & Control • High-Performance FPV Camera: Lightweight FPV camera optimized for real-time video feedback and situational awareness during flights. • Skydroid T12 Remote System: Professional 12-channel long-range remote controller + R12 receiver with FHSS signal, ergonomic design, and stable link for extended range missions. Accessories & Assembly • Balanced Propeller Set (CW & CCW) for efficient thrust • Silicone Landing Caps to protect landing poles and absorb vibration • Fasteners & Consumables Kit (screws, zip ties, Velcro straps) • Allen Key & Basic Tools for assembly and maintenance
Reviews
There are no reviews yet.