Dronacharya

Menu
3
3
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.
Close-up of an HC-SR04 ultrasonic distance sensor module. The sensor has a rectangular blue circuit board with two circular mesh-covered transducers for sending and receiving ultrasonic waves. Four pins extend from the bottom of the board, labelled Vcc, Trig, Echo, and Gnd, providing power and signal connections. A small crystal oscillator is visible on the upper part of the blue board, marked HC-SR04.

Sonar

₹100

HC-SR04 Ultrasonic Sensor (Custom for Vikas Drone Integration)

The HC-SR04 Ultrasonic Sensor is a cost-effective distance measurement module designed for altitude sensing, obstacle detection, and terrain-following applications in the Vikas drone kit. With its precise ranging capabilities and simple interface, it enhances UAV automation and stability.

Key Features:
  • Custom-Tuned for Vikas Drone – Enables precise altitude hold and obstacle detection
  • Accurate & Fast Distance Measurement – Ideal for low-altitude flight stability and landing assistance
  • Lightweight & Power-Efficient – Minimal impact on UAV performance
  • Simple GPIO Interface – Easily integrates with Arduino, Raspberry Pi, and flight controllers
  • Ideal for UAV Research & Development – Supports custom automation and advanced navigation solutions

Description

HC-SR04 Ultrasonic Sensor (Custom for Vikas Drone Integration)

The HC-SR04 Ultrasonic Sensor is a cost-effective distance measurement module designed for altitude sensing, obstacle detection, and terrain-following applications in the Vikas drone kit. With its precise ranging capabilities and simple interface, it enhances UAV automation and stability.

Key Features:
  • Custom-Tuned for Vikas Drone – Enables precise altitude hold and obstacle detection
  • Accurate & Fast Distance Measurement – Ideal for low-altitude flight stability and landing assistance
  • Lightweight & Power-Efficient – Minimal impact on UAV performance
  • Simple GPIO Interface – Easily integrates with Arduino, Raspberry Pi, and flight controllers
  • Ideal for UAV Research & Development – Supports custom automation and advanced navigation solutions

Additional information

Weight15 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Description

HC-SR04 Ultrasonic Sensor (Custom for Vikas Drone Integration)

The HC-SR04 Ultrasonic Sensor is a cost-effective distance measurement module designed for altitude sensing, obstacle detection, and terrain-following applications in the Vikas drone kit. With its precise ranging capabilities and simple interface, it enhances UAV automation and stability.

Key Features:
  • Custom-Tuned for Vikas Drone – Enables precise altitude hold and obstacle detection
  • Accurate & Fast Distance Measurement – Ideal for low-altitude flight stability and landing assistance
  • Lightweight & Power-Efficient – Minimal impact on UAV performance
  • Simple GPIO Interface – Easily integrates with Arduino, Raspberry Pi, and flight controllers
  • Ideal for UAV Research & Development – Supports custom automation and advanced navigation solutions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

No FAQs available for this product.

Related Products

Related products

Sonar
You're viewing: Sonar ₹100
Buy Now
MENU